View Single Post
Old 03-16-2019, 01:55 PM   #3
Dmarkmc
Registered User
 
Join Date: Mar 2019
Location: Millington TN
Posts: 10
Quote:
Originally Posted by HO455 View Post
Assuming your looking for oil pressure and temperature. Why don't you use the factory ones. You will have to have the temperature sender turned down and rethreaded to install in the passenger side head. Do a search on rethreading the sensor to find more info and the member who does the rethreading. You can replace the factory wire to the sensor without too much work if it needs to be longer.
The oil pressure line most likely will have to be lengthened to reach the nearest oil gallery. Or you can tee it with the LT's sensor.
And with some ingenuity you can rewire the the factory temperature idiot light to be the check engine light.

Good luck and welcome aboard!
Thanks for the info! I’d like to use all gauges and the tach as it came in the CST models. I’d really rather connect all gauges to the ECM. Just seems cleaner and easier if I can find the right gauges. Thanks again!
Posted via Mobile Device
Dmarkmc is offline   Reply With Quote