View Single Post
Old 01-02-2017, 08:29 AM   #2
D13
Registered User
 
D13's Avatar
 
Join Date: Feb 2007
Location: Memphis MI
Posts: 1,851
Re: 250 bellhousing into 292 inline 6

Assuming your flywheel isn't cracked or loose, where is it hitting? If on the outer edge, then you probably have a 'small' clutch bell and need a 'large' clutch bell. Look for one from a 3/4 ton. Measure your flywheel and clutch for comparison.


I know the 3/4 tons use a larger clutch than cars, and that the lighter 1/2 tons use a smaller clutch too,. I'm betting that is wht is going on. If so you 'could' get around it by putting in the smaller clutch - odds are the flywheel is drilled for both.
__________________
1987 2 ton
1982 250/TH350 beater in progress
Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping
Plus a mess o' tractors
D13 is offline   Reply With Quote