Re: "Geronimo" 54' 3100 LS built in PA
1-4 Got some moch up tires on, the offset is wrong but its enough to get it on its own wheels for now. Rims should be showing up this week, then I'll paint them and hopefully get tires put on. Took me a bit to get the rear centered up, I still don't have the pads welded to the axle yet. Want to wait and see if I can set the drivetrain and get the pinion angle.
I'll def still have to add blocks to the rear. Still have to finish the front bracket and in the rear I have to plasma out the hole for the top shackle bushing. My plan is to cut the hole and weld tubing in there so I can use the poly bushing, if not I'll have to just use the bushing and metal that came with the shackle, going that route, I'd have no room for error on my hole.
I feel like progress is good, but same time just inching along, playing the wait game sucks. but once I have wheels on, I'll set cab back on, get engine moched up and hopefully have a continuous flow of work.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481
49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA
Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162
52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame
Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!
www.coffeeandcustoms.com
|