The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What did you do to your truck today.The 3rd chapter

Andy4639 · 11-16-2019, 07:51 PM

I did some painting of small parts and I did some grille work on the 68. I think it's going to be fine once I clean it up and sand it down and primer it. The ramp truck makes a nice work area to by the way.
Oh I fixed my neighbor's tail lights for him on his 94 truck. He had no tail lights when he showed up. When he left he had all his lights working.

I had to work on the spot light on the ramp truck to it wouldn't come on. Had to take it a part and clean the contacts inside the light fixture and inside the handle. I also sprayed it down with lithium grease to make it move better.

11-16-2019, 07:51 PM	#946
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: What did you do to your truck today.The 3rd chapter I did some painting of small parts and I did some grille work on the 68. I think it's going to be fine once I clean it up and sand it down and primer it. The ramp truck makes a nice work area to by the way. Oh I fixed my neighbor's tail lights for him on his 94 truck. He had no tail lights when he showed up. When he left he had all his lights working. I had to work on the spot light on the ramp truck to it wouldn't come on. Had to take it a part and clean the contacts inside the light fixture and inside the handle. I also sprayed it down with lithium grease to make it move better. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.