The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project 67 DRGNWGN

NSK · 10-09-2012, 02:57 PM

I've had a lot of good luck with kits from summit. But you need to have all the info on the motor first as far as bore and crank bore. They do run about 400 for a basic one. Like I said I have a huge shop that's full of tools so if you want to have menhell you check everything out to see if it's even worth fixing let me know and well tear it down
Posted via Mobile Device

10-09-2012, 02:57 PM	#646
NSK Registered User Join Date: Oct 2011 Location: Hardin Tx Posts: 50	Re: Project 67 DRGNWGN - 67 Burban!! I've had a lot of good luck with kits from summit. But you need to have all the info on the motor first as far as bore and crank bore. They do run about 400 for a basic one. Like I said I have a huge shop that's full of tools so if you want to have menhell you check everything out to see if it's even worth fixing let me know and well tear it down Posted via Mobile Device