The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*rage'nrat638* · 03-11-2007, 12:21 AM

WELCOME TO HOLLEY REBUILD DAY
I HAVE IN FRONT OF ME A 600 HOLLEY CARB W/ELECTRIC CHOKE, MOST ADVANCE AUTO STORES STOCK REBUILD KITS FOR THIS CARB.
A FEW ITEMS NEEDED TO DO THE JOB
HOLLEY REBUILD KIT
COMPRESSED AIR
GASKET REMOVER
GUNK HYDRO SEAL PARTS CLEANER
LIGHT OIL
CLEANING BRUSH'S
5/8 WRENCH
1" WRENCH
5/16 NUT DRIVER
CARB STAND --- MAKES JOB A SNAP
FRISBEE --- PARTS TRAY
CLEANING TUB
WATER
CLEAN WORKING AREA

Here we are going to start by removing the front bowl. this is the one with the banjo fuel fitting attached, and accelerator pump. you can see that the old gasket was cut/torn misaligned, and that it had been leaking.
start putting your parts removed in your parts tray

03-11-2007, 12:21 AM	#1
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Holley 600 Rebuild / Overhaul WELCOME TO HOLLEY REBUILD DAY I HAVE IN FRONT OF ME A 600 HOLLEY CARB W/ELECTRIC CHOKE, MOST ADVANCE AUTO STORES STOCK REBUILD KITS FOR THIS CARB. A FEW ITEMS NEEDED TO DO THE JOB HOLLEY REBUILD KIT COMPRESSED AIR GASKET REMOVER GUNK HYDRO SEAL PARTS CLEANER LIGHT OIL CLEANING BRUSH'S 5/8 WRENCH 1" WRENCH 5/16 NUT DRIVER CARB STAND --- MAKES JOB A SNAP FRISBEE --- PARTS TRAY CLEANING TUB WATER CLEAN WORKING AREA Here we are going to start by removing the front bowl. this is the one with the banjo fuel fitting attached, and accelerator pump. you can see that the old gasket was cut/torn misaligned, and that it had been leaking. start putting your parts removed in your parts tray Attached Images Last edited by rage'nrat638; 07-25-2007 at 10:06 PM.