Re: LockDoc's "Low Budget", "Low Maintenance" Project Thread
-
I re-tested the gauges again using Patrick's suggestion. I meant to post a close up of the labeled gauge yesterday but forgot to. (picture 1)
Picture 2 is the overall view of the connections.
Picture 3 is a close up of the connections with the extra, stock 90 OHM resistor added.
Picture 4 is the readout on an old gauge I have
Picture 5 is of the gauge in my good cluster.
Instructions are the same as before, just with the extra resistor added.....
.
Last edited by LockDoc; 03-18-2024 at 03:15 PM.
|