The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**mongocanfly** · 05-18-2019, 04:46 PM

Side job on my hydroboost install was I needed a extra return port into the tank for it...I've seen where some just tee the lines together but have also heard some say it cavitates sometimes...
So I machined a nipple for the return...
Cleaned up a spot on the tank and welded it on..
Then i stuck some magnets in the tank around where the hole would be and drilled on into the tank...I think it'll work

05-18-2019, 04:46 PM	#507
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,596	Re: Columbus..the 1957 IH 4x4.. Side job on my hydroboost install was I needed a extra return port into the tank for it...I've seen where some just tee the lines together but have also heard some say it cavitates sometimes... So I machined a nipple for the return... Cleaned up a spot on the tank and welded it on.. Then i stuck some magnets in the tank around where the hole would be and drilled on into the tank...I think it'll work Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver Last edited by mongocanfly; 05-18-2019 at 10:29 PM.