01/02/16
Put a plug in the bottom of the rear tank, added 10gals to the driver saddle tank that already had 8gal, and added 25gals to the rear tank. Both tanks could have taken more but the 35gals costed me $100. So I stopped.
01/10/16
Got a fuel neck and door for the Burb
Today I installed the fuel neck and door in the driver side for the saddle tank, I didn't like the fuel neck hanging above the rear tire.
Cut the hole
One of the previous owners decided to fill the rested hole with expanding foam then bondo over it, will have to address that another day. Just didn't want it catching on fire while welding
Panel set in place
Starting to tac in place, you can also see the 1/4" of bondo
All welded in place and ground down, have a couple of pin holes but I can throw a small coat of bondo over it when I feel like it
Outside painted
Inside, had to cut a hole in the inner panel and the floor brace
Where it connects to the tank
Now I need to find another fuel door and pipe for the passenger side, figured I should do the fuel necks before I put the floor in.
Also since my original plans were to cut up what ever 4x4 Burb I have to eventually make a crew cab I plan on keeping this Burb 4x4 since the whole back half is rusted out.