The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Chris183 · 03-13-2018, 10:17 AM

Thanks for your input. I did put on a set of rotors and pads from Wilwood but I'm willing to try another set. I bought a brake pressure gauge kit that came with fittings that mounted in the bleeder holes and I a used a couple of fitting from Ace Hardware to mount it to the master cylinder. In the gauge instructions it has a range of 1200psi to 2400psi for most cars with front disk brakes. I would like to find out what the range is for a 72 Blazer before changing any more parts. I do have 33 x 21.5 R15LT tires. The guy from Wilwood said he had the same on his with no problems. I bought the gauge kit from Amazon part #SSBA1704.

Chris

03-13-2018, 10:17 AM	#4
Chris183 Registered User Join Date: Feb 2012 Location: Lindenhurst, NY Posts: 7	Re: 72 4x4 poor front braking Thanks for your input. I did put on a set of rotors and pads from Wilwood but I'm willing to try another set. I bought a brake pressure gauge kit that came with fittings that mounted in the bleeder holes and I a used a couple of fitting from Ace Hardware to mount it to the master cylinder. In the gauge instructions it has a range of 1200psi to 2400psi for most cars with front disk brakes. I would like to find out what the range is for a 72 Blazer before changing any more parts. I do have 33 x 21.5 R15LT tires. The guy from Wilwood said he had the same on his with no problems. I bought the gauge kit from Amazon part #SSBA1704. Chris