Quote:
Originally Posted by 4x41971SWB
Thanks for the reply.
Do you have the forward drive shaft installed?
If so do you have any clearance issues with the 4L70E oil pan?
Are you stock height?
Thank you for your time
|
I do not have the front drive shaft installed but I did test fit and believed it would clear. Might check it again tomorrow to be sure. I need to change the seal in the front diff and have been putting that off as I've never done it before.
Front is stock height, there is a 1" block in the rear, which I've been told isn't stock. I'd like to do something to raise the front to level the truck, but that will have to be next.
BTW: the advance adapters item # I used is 50-5310