The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Brad · 11-11-2006, 12:59 PM

Just use the brackets that are mounted on the booster. You'll need to cut part of the bracket away to make it fit flush up against the firewall, also you'll need to extend the rod that goes from the pedal to the booster but other than those things this is a bolt on deal.

Take a look at mine below to see the area that I've cut away. Also look at how I extended the rod using a coupler. This works great if you don't have a welder.

11-11-2006, 12:59 PM	#3
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: Brake Booster Question Just use the brackets that are mounted on the booster. You'll need to cut part of the bracket away to make it fit flush up against the firewall, also you'll need to extend the rod that goes from the pedal to the booster but other than those things this is a bolt on deal. Take a look at mine below to see the area that I've cut away. Also look at how I extended the rod using a coupler. This works great if you don't have a welder. Attached Images __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...