View Single Post
Old 06-22-2005, 06:26 PM   #5
knsmodels
I make Models
 
knsmodels's Avatar
 
Join Date: May 2005
Location: Bucks, PA
Posts: 626
Problem solved......apparently I did not notice that the rust bug had gotten to my metal track on the bottom of the window....it was peeling in the area around the clip farthest forward on the pass. side. This was causing the binding problem. It was not the fault of the LMC rattle strips!!!....My bad.....I had gone ahead and installed the drivers side and that was working much better so I investigated a little farther on the pass. side and discovered the problem...Thanks...Paul
__________________
Click to see what I do

1972 LWB K10 350/4 sp
1968 SS Chevelle 396/tremac5spd
knsmodels is offline   Reply With Quote