The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - '50 Chevy S-10 Swap Build

Chevytruck10 · 08-06-2014, 06:59 PM

I moved on to start the rust repair. I started with the drivers side lower cowl, inner cowl, rocker panel, and kick panel. Got it all pulled out and cut away some of the floor on the drivers side as well.
Name: IMG_1599.jpg
Views: 1339
Size: 61.6 KB

Name: IMG_1599.jpg
Views: 1339
Size: 61.6 KB

Name: IMG_1600.jpg
Views: 1007
Size: 59.7 KB

Name: IMG_1602.jpg
Views: 999
Size: 47.4 KB

Name: IMG_1618.jpg
Views: 1015
Size: 71.3 KB

Once I got all that pulled out I tacked in the rocker panel and fitted the kick panel and drivers side floor panel. Took quite a bit of trimming to get everything to line up but eventually got it in.
Name: IMG_1659.jpg
Views: 995
Size: 52.7 KB

Name: IMG_1659.jpg
Views: 995
Size: 52.7 KB

08-06-2014, 06:59 PM	#6
Chevytruck10 Registered User Join Date: Dec 2013 Location: Fort Worth, Texas Posts: 27	Re: '50 Chevy S-10 Swap Build I moved on to start the rust repair. I started with the drivers side lower cowl, inner cowl, rocker panel, and kick panel. Got it all pulled out and cut away some of the floor on the drivers side as well. Once I got all that pulled out I tacked in the rocker panel and fitted the kick panel and drivers side floor panel. Took quite a bit of trimming to get everything to line up but eventually got it in.