The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - what is your wheel backspacing when using Porterbuilt suspension

G-NUT · 03-22-2018, 04:44 PM

Thanks for responding. I know things can and will vary a bit from truck to truck, even if it's the same yr/body trucks looking to run the same thing. I'm just looking for an idea. Here's what I have going on.

front
1) McGaughys 2.5" drop spindle
2) PB 1" narrowed UCA's
3) I want the front wheels to tuck enough that I can drive with it lay'd out.

rear
1) inboard bags
2) inboard parallel 4-link
3) watts link

03-22-2018, 04:44 PM	#8
G-NUT Registered User Join Date: Apr 2014 Location: Baldwin County, Alabama Posts: 162	Re: what is your wheel backspacing when using Porterbuilt suspension Thanks for responding. I know things can and will vary a bit from truck to truck, even if it's the same yr/body trucks looking to run the same thing. I'm just looking for an idea. Here's what I have going on. front 1) McGaughys 2.5" drop spindle 2) PB 1" narrowed UCA's 3) I want the front wheels to tuck enough that I can drive with it lay'd out. rear 1) inboard bags 2) inboard parallel 4-link 3) watts link __________________ '84 Suburban C10 Silverado - laying pinchweld to the ground on 22/24. /Porterbuilt / Accuair / Bonspeed / Landsail / Auburn Gear / Richmond Gear / Moser / Raybestos / ProMaxx / Edlebrock / Street Demon / Taylor Wire / K&N / MSD / KillMat / SOLD: 1985 GMC Sierra Classic 2500 3+3 Crew Cab Long Bed