The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

HSRACER · 01-29-2019, 01:21 AM

So we welded up the two kick panel vents, the gas fill hole, the 4 BIG holes in the door for the really ugly side mirrors that were gone when I got the truck, about a million holes in the floor, the fender cap and patch panel on the fender, and of course both side inner and outer rockers.

The inner front roof skin went in very well and fit like it was meant to.

Oh, we also had to pull a dent in the front part of the hood and if you look at a couple of the first pictures you can see where some type of emblem was drilled into that same area that came complete with 4 drilled holes needing to be fixed.

01-29-2019, 01:21 AM	#13
HSRACER Registered User Join Date: Sep 2007 Location: Katy TX Posts: 1,268	Re: Flipper turns keeper... 67 upgrades So we welded up the two kick panel vents, the gas fill hole, the 4 BIG holes in the door for the really ugly side mirrors that were gone when I got the truck, about a million holes in the floor, the fender cap and patch panel on the fender, and of course both side inner and outer rockers. The inner front roof skin went in very well and fit like it was meant to. Oh, we also had to pull a dent in the front part of the hood and if you look at a couple of the first pictures you can see where some type of emblem was drilled into that same area that came complete with 4 drilled holes needing to be fixed. Attached Images __________________ HSRACER Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS Last edited by HSRACER; 01-29-2019 at 02:29 AM.