The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Blazer cargo area floor swap

**lks dcvn** · 02-20-2019, 08:44 PM

I replaced the body mounts and bolts a few months after buying this truck so at least that part won't be problematic. Every one needed to be drilled out since they were all rusted beyond repair.

I will still need to remove the wiring from the rear x-member under the bed and good call on the bolts that are in the b-pillar and are hidden. I've had to cut those out before and it wasn't fun. Pix for reference.

From one of my old build threads: http://67-72chevytrucks.com/vboard/s...d.php?t=341224

http://67-72chevytrucks.com/vboard/s...&postcount=107

http://67-72chevytrucks.com/vboard/s...&postcount=177

Has anybody found a way to access these from the top w/o cutting the inner bed b-pillar from inside the bed? When installing the new bed and bedsides - how are people bolting these together?

02-20-2019, 08:44 PM	#8
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: Blazer cargo area floor swap - old floor removal tips I replaced the body mounts and bolts a few months after buying this truck so at least that part won't be problematic. Every one needed to be drilled out since they were all rusted beyond repair. I will still need to remove the wiring from the rear x-member under the bed and good call on the bolts that are in the b-pillar and are hidden. I've had to cut those out before and it wasn't fun. Pix for reference. From one of my old build threads: http://67-72chevytrucks.com/vboard/s...d.php?t=341224 http://67-72chevytrucks.com/vboard/s...&postcount=107 http://67-72chevytrucks.com/vboard/s...&postcount=177 Has anybody found a way to access these from the top w/o cutting the inner bed b-pillar from inside the bed? When installing the new bed and bedsides - how are people bolting these together? Attached Images