Quote:
Originally Posted by 95 S_Trucker
The 454 intake/distributor is not compatable with the 496. Really the only thing you can change is the throttle body on the 496(OE is drive by wire, you can swap on a drive by cable throttle body(off the 454)
Larry used an NV4500 from a 92-95 truck. Lots of variables. I think his truck is a 78 K10. I havent read through his stuff in a while.
|
Yeah I'm not sure what I was thinking. I remember reading that the 8.1, despite being a tall deck, is compatible with standard height distributors (not with the stock intake of course) but I forgot the 8.1 firing order was also changed so it wouldn't be a simple install after all even with an aftermarket intake set up for port injection. So despite already having the wiring to operate the 4L80 it won’t be a simple drop in which is what I was thinking. Not simple of course but simplified than an entire harness swap.