The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

gmebey · 10-04-2014, 09:27 PM

Update.

I cleaned off the tranny and look closer for the leak. There is two, governor cover and the tranny pan along the front. I removed the pan and checked the flatness...... It is not flat and has about a 1/64 to 1/32 gap between a couple of the bolt holes.

Hmm a cheap cast pan = leak!

Any thoughts on Moroso 42020 pan or similar?

10-04-2014, 09:27 PM	#29
gmebey Registered User Join Date: May 2011 Location: Fort Collins, Colorado Posts: 95	Re: TH400 pan still leaking! Update. I cleaned off the tranny and look closer for the leak. There is two, governor cover and the tranny pan along the front. I removed the pan and checked the flatness...... It is not flat and has about a 1/64 to 1/32 gap between a couple of the bolt holes. Hmm a cheap cast pan = leak! Any thoughts on Moroso 42020 pan or similar? Last edited by gmebey; 10-04-2014 at 09:28 PM. Reason: Spelling