The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Hidden Winch

beanious · 05-09-2022, 12:35 AM

Hello, I mounted it with a Warn 11078 bracket that I must have modified, put in and out 10 times to get to fit perfectly. I used a section of 3x3x1/4 angle iron for additional bracing at the bottom (not pics uploaded yet). I had to offset it toward the driver side by 3/8" due to the motor side being longer than the planet side. I've been working through this one for a bit, just wanted to throw it out there for ideas. If anyone has specific questions feel free to hit me up.

05-09-2022, 12:35 AM	#7
beanious Registered User Join Date: Apr 2008 Location: Sacramento, CA Posts: 195	Re: Hidden Winch - Warn M12000 Hello, I mounted it with a Warn 11078 bracket that I must have modified, put in and out 10 times to get to fit perfectly. I used a section of 3x3x1/4 angle iron for additional bracing at the bottom (not pics uploaded yet). I had to offset it toward the driver side by 3/8" due to the motor side being longer than the planet side. I've been working through this one for a bit, just wanted to throw it out there for ideas. If anyone has specific questions feel free to hit me up.