The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*randy500* · 08-01-2018, 01:03 AM

Dennys Driveshafts also has the cheapest dana U joints and should have the gears too along with free shipping over $99. They also have the cheapest king pin rebuild parts, get the part numbers from the dana 60 bella vista article on Pirate 4x4.
I got my front rotors from Summit with free shipping, I looked up the raybestos part number from rockauto and then found it on Summit, I think the rotors were $37 each, summit had to special order them so it took about 2 weeks to get them.

The long inner axle shaft is about $65 so I bought that new from dennys too. The short one I used a sleeve to repair the inner seal surface, those are about $25 from rock auto.
If you need any part numbers on that stuff just ask.

08-01-2018, 01:03 AM	#16
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 1987 V2500/3500 12v nv4500 build Dennys Driveshafts also has the cheapest dana U joints and should have the gears too along with free shipping over $99. They also have the cheapest king pin rebuild parts, get the part numbers from the dana 60 bella vista article on Pirate 4x4. I got my front rotors from Summit with free shipping, I looked up the raybestos part number from rockauto and then found it on Summit, I think the rotors were $37 each, summit had to special order them so it took about 2 weeks to get them. The long inner axle shaft is about $65 so I bought that new from dennys too. The short one I used a sleeve to repair the inner seal surface, those are about $25 from rock auto. If you need any part numbers on that stuff just ask.