The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - New Project 57 Chevy panel on 78 chevy frame

Second Series · 11-30-2020, 05:18 PM

I like your build. Are you going to use the car headlights? I put a ’47 panel on a ’88 frame and the height is close to stock. The limiting factor was the bed to frame clearance, the AD panel had 2”+ wood blocks, we removed those, and lowered the cross sills. I’m not sure how a TF panel would go, Guess I’ll keep watching here and find out.

11-30-2020, 05:18 PM	#52
Second Series Registered User Join Date: May 2015 Location: Tukwila Washington Posts: 373	Re: New Project 57 Chevy panel on 78 chevy frame I like your build. Are you going to use the car headlights? I put a ’47 panel on a ’88 frame and the height is close to stock. The limiting factor was the bed to frame clearance, the AD panel had 2”+ wood blocks, we removed those, and lowered the cross sills. I’m not sure how a TF panel would go, Guess I’ll keep watching here and find out. __________________ '47 Panel to '88 K2500 Frame Swap Mechanical Speedometer Drive Solution 1947.2 1 ton Chevy Panel 1955.2 Chevy 6700 Bus/RV 1990 Chevy K1500