Quote:
Originally Posted by slowcpe
Now I'm a home a/v guy by profession so I don't have to deal with wiring for impedance much. I would personally go with a Dual 4-ohm voice coil (you have selected 2) as I don't see where the amp is 1-ohm stable. biglass may have better input than me.
Also with the box, from the specs of the sub, is a little large (1.25 cu ft.) for the sub (1.0 cu. ft recommended), but should work just fine. Also the cutout diameter of the sub is a little larger than box so you may have to trim it. No big deal, just making you aware.
Now I don't don't know anything about the amp, box, and sub so I'm just going off the specs on that site.
The JL speakers look good!
|
Quote:
Originally Posted by BIGglaSS
I just took a look at that box. It is ported. I would use a sealed box or build your own. A ported box needs to be built to the speaker manufacturer's specs, not something generic. A sealed box will give better results for novice install.
|
This one should be perfect.
https://www.sonicelectronix.com/item...-MDFS1012.html
Placing my order tonight. Will touch bases with both of you tomorrow,
.