Quote:
Originally Posted by notsolo
Fuel tanks on Blazers were like an after thought in there design. I replaced mine with a poly tank, heated up the filler neck with a heat gun and bent the tube forward 30 degree's. Not a great alternative but it works for now. Filling at the pump is slow 7 Min's. Good luck.... rest of your Blazer is looking good.....Ed
|
I'm dreading this part because that filler neck is directly in-line with the shackle. I was thinking of using a rubber hose and bending it, but I'm not sure if would cause a kink in the hose or not.
I'm open to any alternatives even if it means paying somebody to fabricate some sort of extension that bends and curves up like the original. Is something like even possible?