The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Spring Swap Thread

**argonaut** · 07-05-2015, 11:59 PM

Do you still have enough clearance between your front driveshaft and the bellhousing where the clutch slave sits? I'm assuming the 52s are much more flexible than the stock front springs.

Do you have the bed back on and fuel in the tank? I'm curious what your measurements are from the ground to the wheel well lip at the centerline of the front and rear axles.

07-05-2015, 11:59 PM	#79
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Spring Swap Thread - 1963 K15 Do you still have enough clearance between your front driveshaft and the bellhousing where the clutch slave sits? I'm assuming the 52s are much more flexible than the stock front springs. Do you have the bed back on and fuel in the tank? I'm curious what your measurements are from the ground to the wheel well lip at the centerline of the front and rear axles. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!