The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - removing leaves and dribris from foot well of cowl area

mike16 · 09-15-2018, 09:31 PM

Saw that my 68k20's cowl area was filled with leaves and pine needles. removed the cowl and vacuumed out that debris. Added a fine mesh screen to avoid future problems.

Noticed that the whole side cowl / vent area by the foot well is also filled up with it. Any advice on how it is most easily removed.

looks like the driver side you just pull that whole vent assembly out and vacuum it out . what id it preserved with to prevent rusting further?

passenger side will be a PITA because I have the aftermarket under dash A/C set up from ARA.

Thanks

09-15-2018, 09:31 PM	#1
mike16 Registered User Join Date: Dec 2009 Location: bisbee, arizona Posts: 1,529	removing leaves and dribris from foot well of cowl area Saw that my 68k20's cowl area was filled with leaves and pine needles. removed the cowl and vacuumed out that debris. Added a fine mesh screen to avoid future problems. Noticed that the whole side cowl / vent area by the foot well is also filled up with it. Any advice on how it is most easily removed. looks like the driver side you just pull that whole vent assembly out and vacuum it out . what id it preserved with to prevent rusting further? passenger side will be a PITA because I have the aftermarket under dash A/C set up from ARA. Thanks