The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Behind the seat speaker box and questions

Peanut74 · 05-14-2022, 12:10 PM

Thanks everyone. Took me awhile to respond as life was getting in the way.

I did have one issue I had to figure out. Tested everything before I bolted it and everything was fine. Bolted it in and no sound. Stereo was working but was in protection mode. Took me a couple days but I finally figured it out. My switch wire was touching thr aluminum on my sound dealer and causing the issue. Taped up the end and everything is fine. I will be mounting the amp under the jump seat.

05-14-2022, 12:10 PM	#21
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 590	Re: Behind the seat speaker box and questions Thanks everyone. Took me awhile to respond as life was getting in the way. I did have one issue I had to figure out. Tested everything before I bolted it and everything was fine. Bolted it in and no sound. Stereo was working but was in protection mode. Took me a couple days but I finally figured it out. My switch wire was touching thr aluminum on my sound dealer and causing the issue. Taped up the end and everything is fine. I will be mounting the amp under the jump seat. __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a million pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk" 2012 Jeep JKU "Crush" 1976 Chevy short bed with a 327 and 3 on the tree (Sold it to buy the Blazer) 1971 Chevy Blazer (Sold it)