Re: Rochester 2 Barrel
The heat crossover sent exhaust gases through the manifold and that passage in the base of the carb to warm up the choke. On my 63, I had that same setup, and when I pulled the carb off, one of the studs broke off and everything in the passage was crusty. My choke never worked right because the crossover port was completely clogged on both sides of the intake manifold
__________________
Christian Carpenter
1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit
1981 C10 - Penny 305, th350
1995 Dodge Dakota Sport
"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
|