|
Re: Decisions, Decisions!
The swap was relatively straight forward. There was dimples in the the floor pans where the nuts were welded under the pan. Made it pretty simple. There were a few that were missing the nuts, luckily I was able to get a bolt with large washers instead.
The only real issue was the fact that the Tahoe seats were powered. I did not want to remove the power harnesses from the Tahoe. Luckily my parts truck had manual buckets in it. The larger leather buckets had the seat tracks offset, there are two sets of mounting holes on the frames obviously for a manual setup. I do plan on installing the power back in it eventually.
At this time the front will be leather and the rear will be the stock cloth, hopefully I will find a rear seat to match. Or I might try and modify the Tahoe rear to fit the truck.
|