The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Big Daddy Bear · 07-01-2018, 09:52 PM

Spent a little time this afternoon pulling the bent core support so I can remove the engine and transmission next. Then it will be able to be moved inside my little shop and I won't be so restricted by weather when I get time to work on it.

Can see in the picture of the core support, the driver side headlight is not sitting straight, damage from the previous fender-bender.

07-01-2018, 09:52 PM	#27
Big Daddy Bear Registered User Join Date: Jan 2015 Location: Rochester, WA Posts: 259	Re: Something to tinker with... Spent a little time this afternoon pulling the bent core support so I can remove the engine and transmission next. Then it will be able to be moved inside my little shop and I won't be so restricted by weather when I get time to work on it. Can see in the picture of the core support, the driver side headlight is not sitting straight, damage from the previous fender-bender. Attached Images __________________ No bolt or nut in the world will remain tight if you turn it to liquid!!!