For whatever reason (actually came down to room), I decided to scrap the idea of putting the bags right over the axles. Therefore, I was left with a set of brackets I wasn't going to use, the old brackets I had laying around, and a section of 3x3 tubing I had for the cross brace between the notches.
So I cut apart and cleaned the pieces I thought I might use, and whittled-away on the tubing. Here's what I ended up with...
Upper...
I ended up cutting most of the wedged portion off after changing my mounting location, and rounded the back section of the plate so it wouldn't rub the bag when down.
Lowers...
Then I made some extensions to wrap around the top of the tube.
Everything in place. I mounted the bags with a ride height of 6.5 inches +/-, and then added an inch so the bags wouldn't be completely compressed when laid-out. I Hope this works hahaha
