The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - DG4 Below eyeline mirrors, replacement elbows and mirror heads

Andy4639 · 01-17-2021, 05:52 PM

If my memory serves me right it's because of the vent window being in the line of sight if you use the drivers side measurement on the passenger side. They move the passenger side further back so the view is clear.

I know these are not the mirrors you are using but just thought I would add this. The shop manuals I have have no measurements for adding them even though they show them. The written part doesn't even say what they are. That one paragraph is all it states on them. I checked all 3 of my manuals for this.

01-17-2021, 05:52 PM	#67
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: DG4 Below eyeline mirrors, replacement elbows and mirror heads If my memory serves me right it's because of the vent window being in the line of sight if you use the drivers side measurement on the passenger side. They move the passenger side further back so the view is clear. I know these are not the mirrors you are using but just thought I would add this. The shop manuals I have have no measurements for adding them even though they show them. The written part doesn't even say what they are. That one paragraph is all it states on them. I checked all 3 of my manuals for this. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.