[SCOTI]

I appreciate the good vibes guys!


So I got the a-arms back late Wed night. I started cutting the bump stops off Thursday as well as laying out my cut lines & Friday I picked up the re-chromed OE front bumper.

Today I chased down all new bumper bolts as the ones that came off had seen better days. Once back @ the shop, I got the bumper back on but it will need to come back off again to open up some holes & allow adjustments (needs to be pulled back 1/2" on the pass side to equal the driver side).

Then I moved on to the a-arms.
Drilled holes for the corners to minimize stress related issues....
Cut the spring pockets out....
Cleaned everything up & removed the remaining shock gusset on the bottom....