The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rokcrln · 12-10-2007, 10:03 AM

All corect! The only differance in the rear of a 4x4 to 2x4 frame is the 4x4 does not flair out were the coil springs would mount like they do on a 2x4 frame. You can simply make brackets off the side of the frame to mount them to. I think ECE just did this in one of the mags! Just found it. Sport Truck mag and it is January 08 Vol 21 pg 68-71.

Hope this helps. Nice work by the way so far.

Kevin
LFD Inc.

12-10-2007, 10:03 AM	#9
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: my 1970 blazer build=4wd to 2wd All corect! The only differance in the rear of a 4x4 to 2x4 frame is the 4x4 does not flair out were the coil springs would mount like they do on a 2x4 frame. You can simply make brackets off the side of the frame to mount them to. I think ECE just did this in one of the mags! Just found it. Sport Truck mag and it is January 08 Vol 21 pg 68-71. Hope this helps. Nice work by the way so far. Kevin LFD Inc.