|
Re: Saddle tanks on a Fleetside?
Quote:
Originally Posted by El Jay
Just a tad off topic: I installed 2 saddle tanks on my Jimmy back in the '70s.
They bolted to the floorboard just like the tanks in the link in rbagley's post. They were mounted outside the frame rails and ran roughly from the rear wheel wells forward almost to the toe board. the filler was in the rear wheel wells.
I had to run 2 switching valves, 1 for the fuel to the fuel pump and 1 for the return line back to the tank.'IIRC, they held just about 18 gal. each.
I don't know of any reason why the same set up couldn't be used on a pick up.
|
sounds like what I have.
__________________
07 Chevy classic LBZ Duramax (a few mods)
'67 Chevy 1/2 ton 2wd (in pieces)
'69 Chevy 1/2 ton 2wd (on hold)
'71 GMC 3/4 ton 4x4
‘71 GMC 1/2 ton 2wd suburban
|