Quote:
Originally Posted by FAKKY
The wiring through the column is pretty much as shown in this diagram.
So I assume i then run the following wires to the two positive (black) you mentioned. - left rear turn
- left tail park
Ground the 1 wire on drivers side.
Then repeat for Right (passenger side).
If thats right ....... my question would be ..... the reverse light wires of the transmission - do they "plug/splice" into these wires also ..... or do I buuy seperate backup lights and mount them and wire to those.
thx
|
yep you have it right so far.
as for the reverse lights, they dont plug or splice into those wires, only the brake/turn wire comes from the column. the park light wire comes from the headlight switch and the reverse light wire comes from the trans direct to the reverse lights you buy and install.