[skymangs]

Thanks 99, I really like your build as well. I'm glad to hear we are on the right track as far as cab placement and ride height go. After much deliberation, Michael and I have decided to go ahead and push the motor back 2 inches. (might as well make some space up there while we have it apart). That should help with manifold/header clearance.

I was tracking on cutting the frame horns right in front of the steering box, just wanted to get the cab lined up before I cut anything (Just a rule of thumb for me).

We are going to modify the stock support and angle it. Run an aluminum radiator and 16" puller fan. That should keep it cool if he runs a 160 deg stat in the summer.

We are also planning to run 2" drop spindles and 3" blocks, but I didn't want to modify any suspension till I see how it sits on the new frame. Didnt get too much done today. made templates for body mount brackets and started cutting them out of 14ga. steel. I'll post some pics tomorrow.