The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Captainfab** · 06-12-2011, 11:57 PM

All the GM factory 4 wheel disc cars and trucks that I remember looking at were 1/4" line to the rear. So I know 1/4" will work, but I don't know for sure about 3/16".

Edit: I just realized I should clarify something. The 1/4" line to the rear, would just be from the proportioning valve to the hose that goes from the frame to the differential. Then from the tee on the end of the hose, the lines should be 3/16" to each wheel.

06-12-2011, 11:57 PM	#130
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Camaro Caliper Brackets All the GM factory 4 wheel disc cars and trucks that I remember looking at were 1/4" line to the rear. So I know 1/4" will work, but I don't know for sure about 3/16". Edit: I just realized I should clarify something. The 1/4" line to the rear, would just be from the proportioning valve to the hose that goes from the frame to the differential. Then from the tee on the end of the hose, the lines should be 3/16" to each wheel. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 06-13-2011 at 01:24 AM.