Quote:
Originally Posted by burnin oil
Measure the springs and make sure of the length. There has been many threads about 52" springs. My 72s lift kit was the same as the 73 up. For the rear look around and there is a company that sells a relocation bracket for the rear that uses the stock spring and gets 4" lift the correct way without added arch or lift blocks. I totally trashed the rear lift springs on my truck and they are bent at all 4 corners and I don't abuse it off road! When I replace them it will be with the relocation bracket and stock springs out back.
|
burnin oil, is this the kit you are talking about? I know lots of people use them on 73 & up trucks.
http://diy4x.com/product.php?productid=17730
This company has some for 67-72, they look different than the 73 up flip kits
http://www.offroaddesign.com/catalog/shacklekit.htm
The only thing with a shackle flip is that it may change your pinyon angle enough that your drive line will vibrate. You may need to use wedges between axle tube & spring to get the pinyon back to being on the same plane as the transfer case output shaft.