Re: 1960 BBC Swap
Quote:
Originally Posted by 350TacoZilla
I cant add anything here for tech help but I will say the 402's aren't a bad motor. I had one in my 79 k10 and it had enough power for normal truck uses and still ran 14.7 in quarter @ 92mph if memory is correct. The small oval port heads and low compression they usually have means they run on even low octane fuel and are decent on MPG for a big block.
Going with the muncie is a good choice with that motor also, the TH400's are great transmissions for reliability even in rough service vehicles or big power but they really suck HP to spin.
|
I have some better heads in the works to wake it up a bit, the factory 230hp from 1972 is not the best so some heads from a 68 396 should make a little more compression and thus more HP. I also have a th400 but will be backing this with a M20 Muncie. Also going to be running the stock eaton rear for a little bit until I get the 12 bolt built.
__________________
Mike
1960 C10 Short Step 235 w/ 3 on the tree
1999 Mazda Miata <- Track Car
2016 Chevrolet Colorado z71
2016 Chevrolet Traverse - Wifes Car
2014 Honda CBR500R <- Also A Dust Collector
2009 Suzuki GSXR600 <- Stolen
|