|
Re: Bed Alignment
I'm hoping that it shifted 1/4" left on it's own, and will go back to center. I thought I was close to starting after a complete drivetrain upgrade, but a monkey wrench got thrown into my plans. I left the bed loose, and ordered a set of rubber bushings. I already loosened all the nuts and bolts, and just have to break the welds on the bolt heads in the cab. I'm thinking I'll go back and forth with the floor jack to all (6) positions to raise it in 1/4" increments. My concern is that I'll put some sort of stress into the front fenders.
|