Quote:
Originally Posted by CCCC
I connected the output line from the trans to the input side of the add-on cooler and then connected the output side of the added cooler to the input of the radiator - did not touch the original radiator output line. In this way, the trans fluid is cooled some by the new cooler before it goes through the jacket in the radiator and then back to the trans.
|
actually that is backwards. it should go in the top of radiator, out the bottom, and then through the aftermarket cooler. the radiator tank is hotter than the air in front of it. this way the rad. takes away some heat and then the cooler takes the rest.
I would get a stacked plate design, not the tube and fin type.