The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Vintage air

Peanut74 · 03-14-2021, 09:22 AM

Hi Matt,
I need a quote and guidance on a Vintage Air unit for my '67 C10 pickup. What I have is:
- '67 cab with factory A/C dash
- Shaved the firewall but don't mind drilling holes for the A/C and heater lines if I have to
- I used an early serpentine system and it is setup for an R4 compressor
- Compressor is on the passenger side
- I do have the outer A/C vents but the center vent outer cover is broken.
- Would like to use the Surefit design with the electronic conversion of the factory control
- I will need the A/C hoses, and interior ducting for both and A/C and defrost

Thanks,
Bob

03-14-2021, 09:22 AM	#698
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 590	Re: Vintage air - huge sale! Hi Matt, I need a quote and guidance on a Vintage Air unit for my '67 C10 pickup. What I have is: - '67 cab with factory A/C dash - Shaved the firewall but don't mind drilling holes for the A/C and heater lines if I have to - I used an early serpentine system and it is setup for an R4 compressor - Compressor is on the passenger side - I do have the outer A/C vents but the center vent outer cover is broken. - Would like to use the Surefit design with the electronic conversion of the factory control - I will need the A/C hoses, and interior ducting for both and A/C and defrost Thanks, Bob __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a million pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk" 2012 Jeep JKU "Crush" 1976 Chevy short bed with a 327 and 3 on the tree (Sold it to buy the Blazer) 1971 Chevy Blazer (Sold it)