|
Re: "Old Olive" 1970 C10 porterbuilt build
Ok, got the steering notches in and started to bolt on the front crossmember and ran into my first problem...
I've drilled out each frame hole to 9/16th's as instructed in the procedure, and have my two front bolts in. However the rear 2 holes in each side do not line up properly to get the other 4 bolts in...
BTW the very front factory crossmember is still in, the instructions didn't stay to remove it but I've seen most PB trucks with it out.
Any ideas from the experts??
The first pic is drivers side, second is passenger side. It flipped the images on me.
|