The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Flysocal · 05-01-2016, 12:09 AM

The brake booster needs a flat surface so I removed the ribs and reinforced the cab side of the firewall with 18GA. Drilled a 2-1/4 hole. If someone could recommend a good booster for 4 wheel Wilwood disk brakes I would appreciate it. Not sure if I should run 7 or 8 inch single or dual diaphragm? Will be going with Wilwood master and proportioning valve.

05-01-2016, 12:09 AM	#67
Flysocal Registered User Join Date: Jun 2015 Location: Glendale Posts: 414	Re: 1949 Chevy 3100 Build Thread The brake booster needs a flat surface so I removed the ribs and reinforced the cab side of the firewall with 18GA. Drilled a 2-1/4 hole. If someone could recommend a good booster for 4 wheel Wilwood disk brakes I would appreciate it. Not sure if I should run 7 or 8 inch single or dual diaphragm? Will be going with Wilwood master and proportioning valve.