The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 67-72 OE Shock Relocators

SCOTI · 08-24-2009, 09:39 PM

Lot's of times when guys drop their 67-72 coil spring trucks they opt for relocating the mounting points of the shocks to gain precious travel back. Since you must remove the original shock brackets, with just a little effort, drill, angle grinder w/a cutting/grinding disc, & a press or vise, you can modify your originals.

Uppers first: You want to relocate the hole higher & slightly over vs. OE....

08-24-2009, 09:39 PM	#1
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,917	67-72 OE Shock Relocators Lot's of times when guys drop their 67-72 coil spring trucks they opt for relocating the mounting points of the shocks to gain precious travel back. Since you must remove the original shock brackets, with just a little effort, drill, angle grinder w/a cutting/grinding disc, & a press or vise, you can modify your originals. Uppers first: You want to relocate the hole higher & slightly over vs. OE.... Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*