The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Need pictures of bedside fillet doors, even in progress

custom10nut · 04-26-2017, 09:17 PM

I'm about to start my tank relocation project on my truck.
I plan to use a side fill tank and have the filler door on the bed side behind the wheel opening.
I know many have done this, so I'm hoping there are a bunch of pictures, showing where to cut for the filler tube, and where it come up into the bed.
I scored a filler tube cover out of a newer Blazer, so I won't have to fabricate that to make it look right.
I'll post some pictures of what I have and where I plan on putting them to get, some advice from the experts

04-26-2017, 09:17 PM	#1
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,846	Need pictures of bedside fillet doors, even in progress I'm about to start my tank relocation project on my truck. I plan to use a side fill tank and have the filler door on the bed side behind the wheel opening. I know many have done this, so I'm hoping there are a bunch of pictures, showing where to cut for the filler tube, and where it come up into the bed. I scored a filler tube cover out of a newer Blazer, so I won't have to fabricate that to make it look right. I'll post some pictures of what I have and where I plan on putting them to get, some advice from the experts Last edited by custom10nut; 04-26-2017 at 09:22 PM.