The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project~”

Grizz1963 · 09-14-2020, 04:18 AM

Opinions again.

I do not have any of the stuff needed yet, and not given the it a lot of technical consideration.

But.

I a, thinking a simple, hinged pipe bar where the yellow masking tape lies.

Then attached to it, a racing style window net (re-used, recycled) hanging down on a 5mm to 10mm Max rod shaped frame for it to be attached to.

99% visual, racer style. Not really an airbag or soft plush cushion.

I also thought that buying some nylon webbing and stitching it all together by hand was an option, albeit not a clever one.

Opinions?

09-14-2020, 04:18 AM	#792
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,478	Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project Opinions again. I do not have any of the stuff needed yet, and not given the it a lot of technical consideration. But. I a, thinking a simple, hinged pipe bar where the yellow masking tape lies. Then attached to it, a racing style window net (re-used, recycled) hanging down on a 5mm to 10mm Max rod shaped frame for it to be attached to. 99% visual, racer style. Not really an airbag or soft plush cushion. I also thought that buying some nylon webbing and stitching it all together by hand was an option, albeit not a clever one. Opinions? __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.