[brimc]

Thanks Guys !!
Today I got the rad support mounted on the frame.



It really should have had a 2nd coat of paint but I ran out. Then I got the IC mounted using factory hold downs.





One thing I was really going for was to be able to replace hoses and belts with OEM parts off the shelf. This one made me feel good after confirming that it will work. IC boots and rad hoses fit perfect. I had to cut about an inch off one end of each IC tubes and will need 1 inch taken out of the rad hoses due to the engine being closer to the rad compared to the old Dodge.









Little by little. Sure wish time went as slow at home as it does a work !!