|
Re: Sheet Metal Console
This is where a "stump" aka round of firewood comes in handy. Use something like that as your backer to hammer it into shape. If you have a dead blow hammer you might start with it to take most of that dip out without putting hammer marks in it that you have to take care of. then get out your hammer and dolly to do the fine tuning.
__________________
Founding member of the too many projects, too little time and money club.
My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
|